The PX Series offers an effortless yet effective means of egress while keeping the integrated look and feel of all Syntéga door systems. Used in applications where a full-length exit device
is not required, the PX Series shares the same Pushpad profile as in the full-size exit device to ensure continuity of design. The PX also features the same unique integrated lock case as all other Syntégra door systems, and offers many of the same mechanical and electrical options. Syntégra proves that smaller does not necessarily mean less when it comes to functionality.
PX Series Benefits |
Tested Durability
- Heavy-wall aluminum construction
- Pushpad holds retracted when the door is in the open position – maximizing the clear opening width and reducing damage
|
Uncompromised Safety
- ITS listed for fire (UL10C) for
single-point top latching or top and bottom latching
- Pushpad fully retracts in the open position for maximum clear opening
- Top latching instead of a side edge latchbolt and strike for singles and pairs prevents catching on clothing or equipment
- Optional antimicrobial coatings available for healthcare, educational and other germ-sensitive environments
- CleanVue – Simple hygienic release feature allows for full access to the pushbar for sanitizing without disassembly.
|
Unequaled Aesthetics
- Minimized pushbar end caps with hidden fasteners provides clean, uninterrupted lines
- Pushpad available in architectural and décor-matching finishes
- Escutcheon-free levers available in popular styles and finishes
- Optional integrated top strike prep without the need for a surface mounted auxiliary plate
- Projection-type latchbolt minimizes top strike view and minimizes top door "notch" required by others
- No floor strikes required - Fire ratings without bottom latchbolts
|
|
Enhanced Security
- Patent-pending friction-limiting latchbolt with 7/8" throw
- Available in top latching or top and bottom latching
- Optional exterior lever with
anti-abuse clutch
- Latches and operating mechanisms concealed within
steel door and protected from attack, abuse
and tampering
|
Versatility
- Extensive range of functions to fit most openings
and applications
- Access control-ready with electrified lever and RX options
- Electrical options available in kit-form for future upgrades
|
PX Series Functions |
Model # |
ANSI Functions* |
Description |
PX |
01 |
Exit Only, no trim.
|
PX |
02 |
Entrance by fixed lever/pull when actuating bar is locked/dogged
down. Non-rated openings only. |
PX-LC |
03 |
Entrance by fixed lever/pull when latch is released by key.
Key removable only when locked (Nightlatch).
|
PX-LC |
08 |
Entrance by lever. Key locks or unlocks lever.
|
PX-LC |
09 |
Entrance by lever. Key removable only when
locked (Nightlatch).
|
PX-LC2 |
10 |
Entrance by lever. Inside or outside key locks or unlocks lever.
Outside key releases latch.
|
PX-C |
13 |
Entrance by key
|
PX-L |
14 |
Entrance by lever. Always active, no cylinder.
|
* Equivalent ANSI/BHMA A156.3 functions used for reference. |
PX Series Hardware Specifications |
Device Functions |
Configured from the factory during the assembly of the door systems.
See Function Chart for capabilities. |
Fire Ratings |
Listed for positive pressure fire tests (UL10C) with single-point top latching or
top and bottom latching. |
Pushpad Height |
4” |
Pushpad Width |
8.25" (210 mm) for all opening widths. |
Pushpad Projection - Extended |
1-3/16" (30 mm) |
Pushpad Projection - Depressed or with Door Held Open |
3/16" (5 mm) |
Pushpad Centerline |
38-1/2" (978 mm) from finished structural floor
(not including floor covering). |
Pushpad Materials |
6063-T6 Extruded Aluminum with finish inserts. |
Strikes |
Optional integrated top strike included with Syntégra KD and welded frames.
Surface applied retrofit strike available (P/N TSK-1 Kit).
Bottom strike ½" diameter hole threshold or surface strike
(P/N BSK-1 Kit). |
Electrical Options |
RX – Request to Exit. Provides a switch closure when the exit device is actuated.
RX2 – Same as above with two independent SPST switches. |
LM - Latchbolt monitoring. Switch mounted in top strike to provide notification
that the door is secure. |
ELS - Electrified lever. Allows lever to rotate to retract the latch(es) when energized.
Fail-Secure or Fail-Safe. |
Mounting |
Concealed fasteners on pushpad end caps, latches and handles. |
Latchbolts |
Top latching only standard with – 7/8" (22.2 mm) throw. Projection type Friction
limiting-design with deadlatch feature.
Bottom – Massive Stainless Steel 7/8" throw bolt with conical tip. |
Optional Keyed Cylinder |
Standard diameter Mortise Cylinder with
"standard" cam. Can accept 1" cylinder length
or greater. A 1" cylinder length does not require
a collar. Anything above this cylinder length will
require a spacer collar equal to the dimension
in excess of 1". (Example 1-1/8" cylinder length
requires a 1/8" collar). |
Function 10 -
Back-to-back Cylinders |
Requires a 1/4" collar for a 1" cylinder length. For longer cylinders, add the dimension
in excess of the 1" cylinder length to the collar thickness.
(Example 1-1/4" cylinder length requires a 1/2" collar). |