Door Construction

The Syntégra door can be constructed of 18ga./16ga.
A60 Galvanized/Galvanneal Steel (standard).

Available cores include:

  • Kraft Honeycomb for general use
  • Steel Stiffened to provide enhanced strength in high traffic applications
  • Polystyrene for installations requiring an insulation/R factor
  • Temperature Rise to inhibit the transfer of heat from one area to another (e.g., stairwells)
  • Lead-Lined for medical installations where X-Ray, PET or CT Scan rays are a factor
Honeycomb Steel Stiffened Polystyrene
(non rated openings)
Lead-Lined
(non rated openings)


Doors can be configured in single, same swing pairs, double egress pairs and unequal pairs. They can also be fitted with integral lite kits that are frameless on the secure side of the door to provide better security and improved aesthetics. (see below)

Door Finish Options:

  • Primecoat: Steel products are available factory prime coated with an extremely durable proprietary EPA approved gray primer (ready for finish painting)
  • Prefinished Paint: Factory finishing ensures the highest quality finish without hte hassles and mess of on-site painting. Syntégra's prefinished coasting are extremely durable and deliver constient results that can only be achieved within a controlled factory setting.
  • Surfacequest Architectural Fusions are the next generation in surface options. Available in over 1500 stunning patterns including wood, stone, metallic and leather, these surfaces will transform your openings to meet your imagination. Visit Surfacequest.com for more information.

Vision Lite Options:

Elevation Types:

f flush

F
Flush

f flush

NV
Narrow
Vision Lite

f flush

V
Vision Lite

f flush

HG
Half-Glass

f flush

G2
Half-Glass
X 2

Vision Lite Frame Options:

integral integral integral
  • Integral RS Kit - Standard
  • 5/8" X 5/8" Glass Stops
  • Suitable for 1/4" - 1/2" Glass
  • Integral Blade Stop Standard
  • 5/8" X 5/8" Glass Stops
  • Suitable for 1/4" to 1" Glass
  • Low Profile Beveled
  • 7/16" X 1-1/4" Glass Stops
  • Suitable for 1/4" to 1" Glass

Frame Construction

Syntégra offers frame types for single, double egress or same swing applications. Frames are available in KD drywall and welded configurations.

  • Standard frame is 16 ga. Cold rolled Knockdown construction
  • Integrated strike prep when ordering the Syntégra Frame
  • Standard profiles available to accommodate various opening conditions
  • Custom profiles to suit special applications

    Frame Construction
    Gauge Options: 16 GA (STD), 14 GA Closer
    Reinforcement:
    12 GA
    Material: A-60 Galvanneal Other Reinforcements: 12 GA
    Corners: Machine Mitered Anchors: 16 GA

    Construction Options
    (STD) NAAMM/HMMA 861: SDI 100, HMMA 860:

    Fully welded (Face and soffit), or Knockdown Floor Clips: 16 GA
    Primer: Fully welded (Face and soffit), or Knockdown




    Construction Options:
    Mitered – Fully Welded Mitered – Knock Down
    fully-welded knock-down


    Typical Frame Profile Examples:




    Anchoring Options:
  • s1

    S1 - Standard
    Strap Anchor

    s2

    S2 - Flush Metal
    Stud Anchor
    s2

    S3 - Recessed Metal
    Stud Anchor

    s2

    S4 - Standard
    Base Anchor

    s1

    S5 - Masonry
    Tee Anchor

    s1

    S6 - Wire
    Masonry Anchor

    s1

    S7B - Punch and Dimple Masonry Anchor

    s1

    S7P - Pipe and
    Strap Anchor

    s1

    S8 - Adjustable
    Base Anchor

    s1

    S9T - Twist-In Universal Anchor

    s1

    S10 - Knock Down Compression Anchor

    s1

    S11 - Adjustable Masonry Anchor