XT Series Flush Exit Device Openings

The flagship of Syntégra’s integrated door systems is the XT Series, which combines the functionality of a mortise lockset with the free-egress safety features of an exit device.

Building owners no longer have to sacrifice aesthetics for strength and durability because Syntégra engineers their door systems to be configurable and adaptable to meet the needs of the each opening. Finally, a ‘no compromise’ solution that looks as great as it performs.

The sleek yet balanced near-flush exit device recesses into the door face to maximize the clear opening width for a safe and accessible path of egress while complying with the strictest fire and life safety codes. Plus, the robust mechanisms and electrical functions are engineered to meet the most demanding and punishing commercial, educational, institutional, and industrial environments.

Typical Applications

Single doors, pairs and double egress pairs found in the following applications:

Areas of assembly – arenas, ballrooms, houses of worship, performing arts, recreation facilities and restaurants
Areas of refuge – elevator lobbies and stairwells
Areas of separation – cross corridor
Paths of egress – building exits and ground floor stairwells

Benefits

Tested Durability

Heavy-wall aluminum construction
Pushbar holds retracted when the door is in the open position, maximizing the clear opening width and limiting damage

Enhanced Security

Patented friction-limiting latch bolt with 7/8″ throw
Available in top latching or top and bottom latching
Exterior lever with anti-abuse clutching
Protected latches and operating mechanisms are concealed within the steel door and sheltered from attack, abuse, or tampering

Versatility

Extensive list of ANSI functions to suit most openings and applications
Access control ready with latch retraction, electrified lever and RX options
Electrical options available in kit-form allowing for future upgrades

Uncompromised Safety

Listed for flush Panic Hardware (UL305) and for fire tests (UL10C) with single-point top latching or top and bottom latching
Pushbar holds retracted when the door is in the open position maximizing the clear opening
Top latching instead of side edge latchbolt and strike for singles and pairs prevents catching on clothing or equipment
Optional antimicrobial coatings available for healthcare, education and other germ-sensitive environments
CleanVue – Simple hygienic release feature allows for full access to the pushbar for sanitizing without disassembly

Unequaled Aesthetics

Minimized pushbar end caps with hidden fasteners provides clean, uninterrupted lines
Pushbar available in architectural and décor-matching finishes
Escutcheon-free levers available in the most popular styles and finishes
Décor Series levers used to make a unique design statement, or to match other locksets used on a project
Optional integrated top strike prep eliminates the need for a surface mounted auxiliary plate
Projection type latchbolt minimizes the top strike view and minimizes the top door “notch” required by others
No floor strikes required means fire ratings without the need for bottom latchbolts

ANSI/BHMA A156.3 Exit Device Functions

Systems Overview

Construction

Ratings & Compliance

Door Systems Ratings and Compliance

Model Number	ANSI Function	Description
XT	01	Exit Only, no trim.
XT-LC	03	Entrance by fixed lever/pull - latch released by key. Key removable when locked (Nightlatch).
XT-LC	08	Entrance by lever. Key locks or unlocks lever.
XT-LC	09	Entrance by lever. Key removable when locked (Nightlatch).
XT-LC2	10	Entrance by lever. Inside or outside key locks or unlocks lever. Outside key releases latch.
XT-C	13	Entrance by key.
XT-L	14	Entrance by lever. Always active, no cylinder.

If our standard levers don’t match your style preferences please ask about our Décor Lever Series.

Antimicrobial coatings are available for healthcare, education and other germ sensitive environments.

Hardware Specifications

Device Functions	Configured from the factory. See Function Chart for description.
Fire Ratings	Listed for Panic Hardware (UL305) and for positive pressure fire tests (UL10C) with single-point top latching or top and bottom latching.
Pushbar Height	4”
Pushbar Width	15 ¼" (387 mm) for 24" to 29-15/16" openings 18 ¼" (464 mm) for 30" to 35-15/16" openings 24 ¼" (641 mm) for 36" to 41-15/16" openings 30 ¼" (768 mm) for 42" to 51" openings
Pushbar Projection - Extended	1-3/16" (30 mm)
Pushbar Projection - Depressed or with Door Held Open	3/16" (5 mm)
Pushbar Centerline	38-1/2" (978 mm) from structural floor (not including floor covering).
Pushbar Materials	6063-T6 Extruded Aluminum with finish inserts.
Strikes	Top strike can be mortised or surface applied (P/N TSK-1 Kit). Bottom strike, if applicable, is a ½” diameter hole threshold or surface strike (P/N BSK-1 Kit).
Electrical Options	RX – Request to Exit. Provides a switch closure when the exit device is actuated. RX2 – Same as above with two independent SPST switches.
	ML - Motorized latch retraction quietly and efficiently retracts the latch(es) and pushbar when energized. Configured for fail-secure to comply to fire ratings.
	LM - Latchbolt monitoring provides notification when the latch is extended.
	ELS - Electrified lever. Energizing allows lever to rotate to retract the latch(es). Fail-Secure or Fail-Safe available.
Mounting	Concealed fasteners on pushbar end caps, latches and handles.
Latchbolts	Top latching standard with – 7/8" (22.2 mm) throw. Projection type - friction limiting-design with deadlatch feature. Bottom – Stainless Steel 5/8" throw bolt with conical tip.
Optional Keyed Cylinder	Standard diameter Mortise Cylinder with 'standard' cam. Accepts 1" cylinder length or greater. Cylinder in excess of 1” requires a spacer collar equal to this excess (Example 1-1/8" length requires a 1/8" collar).
Function 10 - Back-to-back Cylinders	Requires a 3/16" collar for a 1" cylinder length. For longer cylinders, use the following to dimension the collar: Cylinder Length –1” + 3/16”= Collar (Ex. 1-1/4" requires a 7/16” collar).