XT Series Exit Device Openings

The flagship of Syntégra’s integrated door systems is the XT Series, which combines the flexibility of a mortise lockset with the free-egress safety of an exit device.

Building owners no longer have to sacrifice aesthetics for strength and durability because Syntégra door systems combine versatility, security and aesthetics into a complete package.

The sleek yet balanced full-length pushbar is recessed into the door face for a safe and accessible path of egress while complying with the strictest fire and life safety codes. Plus, the robust mechanisms and electrical functions are engineered to meet the most demanding and punishing commercial, medical and institutional environments.

Typical Applications

Single doors, pairs and double egress pairs found in the following applications:

  • Areas of assembly – arenas, ballrooms, houses of worship, performing arts, recreation facilities and restaurants
  • Areas of refuge – elevator lobbies and stairwells
  • Areas of separation – cross corridor
  • Paths of egress – building exits and ground floor stairwells

Benefits

Tested Durability

  • Heavy-wall aluminum construction
  • Pushbar holds retracted when the door is in the open position, maximizing the clear opening width and limiting damage

Enhanced Security

  • Patent-pending friction-limiting latch bolt with 7/8″ throw
  • Available in top latching or top and bottom latching
  • Exterior lever with anti-abuse clutch
  • Protected latches and operating mechanisms are concealed within the steel door and sheltered from attack, abuse and tampering

Versatility

  • Extensive list of ANSI functions to fit most openings and applications
  • Access control ready with latch retraction, electrified lever and RX options
  • Electrical options available in kit-form allowing for future upgrades

Uncompromised Safety

  • Listed for Panic Hardware (UL305) and for fire tests (UL10C) with single-point top latching or top and bottom latching.
  • Pushbar holds retracted when the door is in the open position maximizing the clear opening
  • Top latching instead of side edge latchbolt and strike for singles and pairs prevents catching on clothing or equipment
  • Optional antimicrobial coatings available for healthcare, education and other germ-sensitive environments
  • CleanVue – Simple hygienic release feature allows for full access to the pushbar for sanitizing without disassembly.

Unequaled Aesthetics

  • Minimized pushbar end caps with hidden fasteners provides clean, uninterrupted lines
  • Pushbar available in architectural and décor-matching finishes
  • Escutcheon-free levers available in the most popular styles and finishes
  • Optional integrated top strike prep eliminates the need for a surface mounted auxiliary plate
  • Projection type latchbolt minimizes the top strike view and minimizes the top door “notch” required by others
  • No floor strikes required means fire ratings without the need for bottom latchbolts

ANSI/BHMA A156.3 Exit Device Functions

Model NumberANSI FunctionDescription
XT01Exit Only, no trim.
XT-LC03Entrance by fixed lever/pull when latch is released by key. Key removable only when locked (Nightlatch).
XT-LC08Entrance by lever. Key locks or unlocks lever.
XT-LC09Entrance by lever. Key removable only when locked (Nightlatch).
XT-LC210Entrance by lever. Inside or outside key locks or unlocks lever. Outside key releases latch.
XT-C
13Entrance by key.
XT-L14Entrance by lever. Always active, no cylinder.

If our standard levers don’t match your style preferences please ask about our Décor Lever Series.

Antimicrobial coatings are available for healthcare, education and other germ sensitive environments.

Hardware Specifications

Device Functions
Configured from the factory. See Function Chart for description.
Fire Ratings
Listed for Panic Hardware (UL305) and for positive pressure fire tests (UL10C) with single-point top latching or top and bottom latching.
Pushbar Height
4”
Pushbar Width
15 ¼" (387 mm) for 24" to 29-15/16" openings
18 ¼" (464 mm) for 30" to 35-15/16" openings
24 ¼" (641 mm) for 36" to 41-15/16" openings
30 ¼" (768 mm) for 42" to 51" openings
Pushbar Projection - Extended
1-3/16" (30 mm)
Pushbar Projection - Depressed or
with Door Held Open
3/16" (5 mm)
Pushbar Centerline
38-1/2" (978 mm) from finished structural floor 
(not including floor covering).
Pushbar Materials
6063-T6 Extruded Aluminum with finish inserts.
Strikes
Standard strike can be mortised or surface applied (P/N TSK-1 Kit). Bottom strike if applicable is a ½” diameter hole threshold or surface strike (P/N BSK-1 Kit).
Electrical Options
RX – Request to Exit. Provides a switch closure when the exit device is actuated.
RX2 – Same as above with two independent SPST switches.
ML - Motorized latch retraction quietly and efficiently retracts the latch(es) and pushbar when energized. Configured for fail-secure to comply to fire ratings.
LM - Latchbolt monitoring provides notification when the latch is extended.
ELS - Electrified lever. Energizing allows lever to rotate to retract the latch(es). Fail-Secure or Fail-Safe available.
Mounting
Concealed fasteners on pushbar end caps, latches and handles.
Latchbolts
Top latching standard with – 7/8" (22.2 mm) throw. Projection type Friction limiting-design with deadlatch feature. Bottom – Massive Stainless Steel 5/8" throw bolt with conical tip.
Optional Keyed CylinderStandard diameter Mortise Cylinder with "standard" cam. Accepts 1" cylinder length or greater. A 1" cylinder length does not require a collar. Anything above this cylinder length will require a spacer collar equal to the dimension in excess of 1". (Example 1-1/8" length requires a 1/8" collar).
Function 10 - Back-to-back Cylinders Requires a 1/4" collar for a 1" cylinder length. For longer cylinders, add the dimension in excess of the 1" cylinder length to the collar thickness. (Example 1-1/4" cylinder length requires a 1/2" collar).