Syntégra offers an extensive body of life-safety, fire and smoke protection ratings in compliance with International Building Code (ICC) requirements in addition to the following:

  • UL10B/UL10C – Fire Tests of Door Assemblies
  • NFPA 252 – Standard Methods of Fire Tests of Door Assemblies
  • UL305 (XT Series) – Standard for Panic Hardware
  • UL1784 – Standard for Air Leakage Tests of Door Assemblies and Other Opening Protectives
  • CAN/ULC S104 – Standard Method for Fire Tests of Door Assemblies
  • NFPA 80 – Standard for Fire Doors and Other Opening Protectives
  • NFPA 101 – Life Safety Code
  • ADA – Americans with Disability Act
  • ICC A117.1 Accessible and Usable Buildings and Facilities
  • ANSI/BHMA A156.04 Door Controls-Closers
  • ANSI/BHMA A156.22 Door Gasketing and Edge Seal Systems
  • ANSI/BHMA A156.26 Continuous Hinges
  • LADBS – Los Angeles Department of Buildings and Safety Approved (LARR #26172)

Maximum SizeMinute Rating
Single Doors
Honeycomb4’3” X 8’2”180
Steel Stiffened4’3” X 9’0”90
Temperature Rise 2504’3” X 9’0”90
Temperature Rise 2504’0” X 8’0”180
Standard Pairs / Double Egress Pairs
Honeycomb8’6” X 8’2”180
Steel Stiffened8’6” X 10’0”90
Temperature Rise 2508’6” X 9’0”90
Temperature Rise 2508’0” X 8’0”180
Hardware
XT,PX, LX Series4'3" x 10'0" Leaf180
FX Series4’0” X 8’0” Leaf180

*Maximum fire ratings listed include lower level ratings (ex. 180 Min. includes 20, 45, 60, & 90). All fire ratings were achieved with top latching only, and fire pins are only required with single door and FX Series Pair applications. A bottom bolt can be added to any of the door systems for additional security if needed.

Surfacequest finishes available on all door constructions referenced up to 180 Min. – Consult factory for limitations.

IBC/NFPA 101 states that the maximum width of a swinging door leaf shall be 48 inches (1219 mm) nominal.

Oversized doors are available with a signed authorization from the AHJ.