PX Series Flush Pushpad Openings

The PX Series offers an effortless, single-motion, means of egress while keeping the integrated look and feel of all Syntégra door systems. Used in applications where a full-length exit device is not required, the PX Series shares the same Pushpad profile as in the full-size exit device to ensure continuity of design. The PX also features the same unique integrated lock case as all other Syntégra door systems, and offers many of the same mechanical and electrical options. Syntégra proves that smaller does not necessarily mean less when it comes to functionality.

Typical Applications

Single doors, pairs and double egress pairs found in the following applications:

  • Areas of Refuge – stairwell, elevator lobby, elevator cab
  • Openings that do not require a full-size exit device for egress compliance

PX Series Benefits

Tested Durability

  • Heavy-wall aluminum construction
  • Pushpad holds retracted when the door is in the open position, maximizing the clear opening width and limiting damage

Uncompromised Safety

  • Listed for fire (UL10C) with single-point top latching or top and bottom latching.
  • Pushbar holds retracted when the door is in the open position maximizing the clear opening
  • Top latching instead of side edge latchbolt and strike for singles and pairs prevents catching on clothing or equipment
  • Optional antimicrobial coatings available for healthcare, education and other germ-sensitive environments
  • CleanVue – Simple hygienic release feature allows for full access to the pushbar for sanitizing without disassembly.

Unequaled Aesthetics

  • Minimized pushpad end caps with hidden fasteners provides clean, uninterrupted lines
  • Pushpad available in architectural and décor-matching finishes
  • Escutcheon-free levers available in the most popular styles and finishes
  • Optional integrated top strike prep eliminates the need for a surface mounted auxiliary plate
  • Projection type latchbolt minimizes the top strike view and minimizes the top door “notch” required by others
  • No floor strikes required means fire ratings without the need for bottom latchbolts

Enhanced Security

  • Patented friction-limiting latchbolt with 7/8″ throw
  • Available in top latching or top and bottom latching
  • Exterior lever with anti-abuse clutch
  • Protected latches and operating mechanisms are concealed within the steel door and sheltered from attack, abuse and tampering

Versatility

  • Extensive functions options to fit most openings and applications
  • RX request-to-exit (RX) and electrified lever (ELS) options for electronic access controlled openings
  • Electrical options available in kit-form allowing for future upgrades

PX Series Functions
Model NumberANSI FunctionDescription
PX01Exit Only, no trim.
PX-LC03Entrance by fixed lever/pull when latch is released by key. Key removable only when locked (Nightlatch).
PX-LC08Entrance by lever. Key locks or unlocks lever.
PX-LC09Entrance by lever. Key removable only when locked (Nightlatch).
PX-LC210Entrance by lever. Inside or outside key locks or unlocks lever. Outside key releases latch.
PX-C
13Entrance by key.
PX-L14Entrance by lever. Always active, no cylinder.

If our standard levers don’t match your style preferences please ask about our Décor Lever Series.

Antimicrobial coatings are available for healthcare, education and other germ sensitive environments.

Hardware Specifications
Device Functions
Configured from the factory. See Function Chart for description.
Fire Ratings
UL10C with single-point top latching or top and bottom latching.
Pushpad Height
4”
Pushpad Width
8 ¼" (210 mm)
Pushpad Projection - Extended
1-3/16" (30 mm)
Pushpad Projection - Depressed or
with Door Held Open
3/16" (5 mm)
Pushpad Centerline
38-1/2" (978 mm) from finished structural floor (not including floor covering).
Pushpad Materials
6063-T6 Extruded Aluminum with finish inserts.
Strikes
Top strike can be mortised or surface applied (P/N TSK-1 Kit). Bottom strike, if applicable, is a ½” diameter hole threshold or surface strike (P/N BSK-1 Kit).
Electrical OptionsLM - Latchbolt monitoring provides notification when the latch is extended.
ELS - Electrified lever. Energizing allows lever to rotate to retract the latch(es). Fail-Secure or Fail-Safe available.
Mounting
Concealed fasteners on pushbar end caps, latches and handles.
Latchbolts
Top latching standard with – 7/8" (22.2 mm) throw. Projection type Friction limiting-design with deadlatch feature. Bottom – Massive Stainless Steel 5/8" throw bolt with conical tip.
Optional Keyed CylinderStandard diameter Mortise Cylinder with 'standard' cam. Accepts 1" cylinder length or greater. Cylinder in excess of 1” requires a spacer collar equal to this excess (Example 1-1/8" length requires a 1/8" collar).
Function 10 - Back-to-back CylindersRequires a 3/16" collar for a 1" cylinder length. For longer cylinders, use the following to dimension the collar: Cylinder Length –1” + 3/16”= Collar (Ex. 1-1/4" requires a 7/16” collar).

Systems Overview

Construction

Ratings & Compliance