XT – Series

Exit Device Openings

The flagship of Syntégra’s integrated door systems is the XT Series, which combines the flexibility
of a mortise lockset with the free egress safety of an exit device.

Building owners no longer have to sacrifice aesthetics for strength and durability because
Syntégra door systems combine versatility, security and aesthetics into a complete package
consisting of an integrated door, frame and hardware.

The sleek yet balanced full-length pushbar is recessed into the door face for a safe and
accessible path of egress while complying with the strictest fire and life safety codes. Plus,
the robust mechanisms and electrical functions are engineered to meet the most demanding
and punishing commercial, medical and industrial environments.

Typical Installations

Single doors, pairs and double egress pairs found in the following applications:

  • Areas of assembly – arenas, ballrooms, houses of worship, performing arts, recreation facilities and restaurants
  • Areas of refuge – elevator lobbies and stairwells
  • Areas of separation – cross corridor
  • Paths of egress – building exits and ground floor stairwells

XT Series Benefits

Tested Durability

  • Heavy-wall aluminum construction
  • Pushbar holds retracted when the door is in the open position, maximizing the clear opening width and limiting damage
  • Exceeds ANSI/BHMA A156.3 Standards for Exit Devices

Enhanced Security

  • Patent-pending friction-limiting latchbolt with 7/8″ throw
  • Available in top latching or top and bottom latching
  • Exterior lever with anti-abuse clutch
  • Protected latches and operating mechanisms are concealed within the steel door and sheltered from attack, abuse and tampering

Versatility

  • Extensive list of ANSI functions to fit most openings and applications
  • Access control ready with latch retraction, electrified lever and RX options
  • Electrical options available in kit-form allowing for future upgrades

Uncompromised Safety

  • Listed for Panic Hardware (UL305) and for fire tests (UL10C) with single-point top latching or top and bottom latching.
  • Pushbar holds retracted when the door is in the open position maximizing the clear opening
  • Top latching instead of side edge latchbolt and strike for singles and pairs prevents catching on clothing or equipment
  • Optional antimicrobial coatings available for healthcare, education and other germ-sensitive environments
  • CleanVue – Simple hygienic release feature allows for full access to the pushbar for sanitizing without disassembly.

Unequaled Aesthetics

  • Minimized pushbar end caps with hidden fasteners provides clean, uninterrupted lines
  • Pushbar available in architectural and décor-matching finishes
  • Escutcheon-free levers available in the most popular styles and finishes
  • Optional integrated top strike prep eliminates the need for a surface mounted auxiliary plate
  • Projection type latchbolt minimizes the top strike view and minimizes the top door “notch” required by others
  • No floor strikes required means fire ratings without the need for bottom latchbolts

XT Series ANSI/BHMA Functions

Model # ANSI Function Description

XT

01

Exit Only, no trim.

XT

02

Entrance by fixed lever/pull when actuating bar is locked/dogged down. Non-rated openings only.

XT-LC

03

Entrance by fixed lever/pull when latch is released by key. Key removable only when locked (Nightlatch).

XT-LC

08

Entrance by lever. Key locks or unlocks lever.

XT-LC

09

Entrance by lever. Key removable only when locked (Nightlatch).

XT-LC2

10

Entrance by lever. Inside or outside key locks or unlocks lever. Outside key releases latch.

XT-C

13

Entrance by key.

XT-L

14

Entrance by lever. Always active, no cylinder.

Leave a Reply

Your email address will not be published. Required fields are marked *

Post comment